Archive for April, 2014

Recycling On Loon Mountain In New Hampshire

Loon Mountain is located in New Hampshire, right in the middle of the state and as a part of the White Mountains. If you know anything about New Hampshire, you’ll know that some of the country’s best winter sports take place in the White Mountains. When you think of skiing; recycling probably isn’t your first visual, but Loon Mountain is looking to change that perception.

Loon Mountain has started a new way of doing things in regards to recycling and energy conservation that should not go unnoticed and will hopefully pave the way for other resorts, all over the world, to follow.

When you think of New Hampshire, the White Mountains, or even the northeastern area of the United States and you picture the area during the winter time, you probably have visions of yummy hot cocoa with tiny marshmellows, hats, mittens and scarves covering as much of a person from Old Mr. Frost, a roaring fire and a foot and a half of snow. Most of that image is accurate, except, unfortunately, for the snow part. For more than a decade or so the northeast region has not been able to enjoy Mother Nature’s usual assault of blizzard upon blizzard, resulting in a sno-globe fantasy of winter sports. While there is still an occassional blizzard, and a lot of the White Mountain Resorts are blessed with a foot or so of base snow, it just isn’t like the winters of our grandparent’s generation. What used to fall from the sky without hesitation or exception, for the most part, today, must be manufactured.

How can you put a limit on learning more? The next section may contain that one little bit of wisdom that changes everything.

While most resorts have to run their snow-making machines there have been advances made in their production to further help with recycling in mind and using energy saving principles. Loon turned to a new idea in snow-making guns where the gun generates its own compressed air, thereby saving on the energy used to have a compressed air hose as a separate unit. At one place they have combined one “disconnect” between two of their popular slopes; Little Sister Trail and Loon Mountain Park and will be able to service both trails with the same snow-making apparatus.

Other efforts toward recycling include changing their light bulbs over to compact fluorescent alternatives, which are said to use 75% less energy and last ten times longer than the average light bulb. Bathrooms now have motion sensors for the lights and fans, so energy is not being used when no one is in the room. New windows and doors have been put in to replace older models that allowed for heat to leak out and the cold northeastern wind to come in.

Let’s take the lead that resorts in New Hampshire have provided and make the changes necessary in our own homes this winter, in the name of recycling and energy-saving efforts. By following the lead set by resorts like the ones on Loon Mountain, you can bet that more resorts will fall in behind, and utilize all of the resources they have in the effort to recycle.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

Extreme Skiing: Pushing Yourself To The Limit

Strictly speaking, traditional extreme skiing is accomplished on long, steep slopes. The elevation is usually 45 to 60 degrees vertical, or even more. And this is performed in dangerous terrain — far from marked tracks. Since the game is done off marked spots, this also called off-piste skiing.

Other sports authorities also refer to this type of skiing as backcountry skiing or off-piste skiing. This type is a potentially high risk sport, since avalance risk is almost always part of the game itself. Extreme exhaustion on the part of the skiers multiplies the risk factor of extreme skiing.

According to several sources, it was the French who coined the term “Le Ski Extreme” in the middle of 1970′s, to refer to this type of high energy skiing. Extreme skiing, however, was being practiced a decade earlier than the birth of its name. Swiss skier Sylvain Saudan, with his “windshield wiper” turn in the early 1960′s was the acknowledged pioneer with this extreme sports.

Other French followed in the footsteps of Saudan and further developed the method in the 1980′s, until it caught on in other parts of Europe, particularly in Great Britain, and ultimately, reaching the American shores. This type of skiing, particularly the “French” model, had produced a considerable number of deaths among the practitioners.

In the US today, extreme skiing has evolved into several forms. Thanks to its loyal followers, the game is continuously transforming. Though several of these forms are not really as dangerous as the concept, they are nevertheless dangerous and, at times, potentially deadly since the risk factor is always high. Some of these modern forms are:

1. Helicopter skiing

This type of skiing, as the name suggests, involves a helicopter. The aircraft is used to elevate the skiers in to a place of his liking. Diver-like, the practitioner rushes downward from the helicopter, careening down a slope track like a vehicle negotiating a highway. If you’re the type of who favors extreme games executed with style, then this type of extreme skiing is just for you.

Truthfully, the only difference between you and Skiing experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Skiing.

2. Snow cat skiing

This is done by being aboard a heated snow cat (sled) then traversing the highly elevated slopes at great speeds. This type of extreme skiing is not particularly dangerous compared with other types. But it is still potentially dangerous because the skier can lose control of the sled while it rushes through the unforgiving snow slopes.

3. Snowkiting

This type of extreme of skiing is performed with a snowkite, or a snowboard. Wind is one prerequisite of this game, however, since it is the snowkite that will lift you into the spots that you choose. Some enthusiasts refer to snowkiting as ultimate game in all of the backcountry skiing events.

Snowkites, with the help of the wind, can allows players to jump carry a player up to 100 feet, making it potentially dangerous, and comparable with other extreme sports.

4. Snowmobiling

Snowmobiling is more like jet skiing, only in snow. Of all the skiing types and forms, this one gives to the player the feeling of safety or “control” since the skiers have a comparative advantage of controlling the snowmobile, being the driver. This is advisable for those skiers who are good drivers since this type of extreme skiing is more like car racing.

The day will come when you can use something you read about here to have a beneficial impact. Then you’ll be glad you took the time to learn more about Skiing.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

Investing in the Oil Sector

There is advantages to investing in areas of the stock market that you know or have some personal experience with on a daily basis. Nearly everyone is effected in one way or another by the commodity oil. If you are an individual you take note of prices at the gas pump, heating bill and other uses of oil. If you are a business owner the price of oil is a factor in the operation of your business. For the purposes of this article the two areas that will be covered is oil & gas and oil service stocks. The first area oil & gas covers some of the big oil stocks whose names you may know. The second area is the oil service stocks that support and aid the extraction and distribution of oil.

Big Oil & Gas:

For all the rhetoric and interesting speculation about “green energy,” and the alternative fuels like ethanol, biomass, and wind energy the present circumstances places the lion share of energy that moves the world in the lap of the oil industry. Names you not only hear about, but have been around in one shape or another for a century. Chevron, Exxon-Mobil, Conoco-Philips, British Petroleum, Royal Dutch Shell and Hess Corporation. These companies have an individual market capitalization of hundreds of billion of dollars, with the exception of Hess that has a mere 19 billion in market cap. It is hard to imagine a more solid group of stocks with as much clout as this elite club.

All of the stocks mentioned above are involved in exploration, distribution and marketing of oil products around the world. Their influence and their financial worth allows them to invest in costly drilling, manufacturing and distribution of oil in all of its forms. While the rhetoric continues about building and providing alternative sources of energy. These companies presently support a significant percentage of the every day uses of energy. Some of the big oil companies even support blends of biomass fuels and ethanol as a compliment to their own primary purposes.

The cost of purchasing stock in this stock is relatively cheap when you consider the likes of Google selling for in excess of $500 per share. Still other intellectual property stocks on the market and conglomerates sell for in excess of $200 a share. The range of prices in Big Oil is between $61 to $89 per share. What you get is a stock that is capitalized with billions of dollars, has a management team that is beyond exceptional and an underlying product “oil” that is in short supply.

I trust that what you’ve read so far has been informative. The following section should go a long way toward clearing up any uncertainty that may remain.

For the moral investor that blames Big Oil for the environmental mess, wars and other maladies the world faces the only American not to blame are the Amish with their horse and buggies. Still, the Amish may leave a smaller foot print, but we all have in one way or another impacted and contributed to the need Big Oil has satisfied and will continue to do so. At present there is small improvements everyone can do, but Big Oil’s contribution to a strong economy, and living in a modern society is not going to be replaced any time soon.

The best bet for future stock growth and for pure investment is in oil & gas. Of the Big Oil stocks that are worth looking at Royal Dutch Shell and Conoco-Philips are the two that have some noteable room for short term growth. Another reason to consider Conoco-Philips is that George Soros recently took a position in this company. In investing it is good to follow the leaders. Review the institutional investors in all of the stocks mentioned above and make a decision on which company you think will be a good addition to your portfolio. If in time you make a huge gain take a portion of the profits and contribute to a fledgling “green energy” cooperative.

Oil Service Stocks:

The oil sector would not be complete without mentioning the drillers who get that precious commodity out of the ground, ocean bed or frozen tundra. The oil drilling stocks are rumored by some financial experts to be waning in appeal or topped out. In order to put this in perspective the long history of the oil drilling companies goes back a century. These tough minded riggers and engineers made the oil industry what it is today. The inventive engineers and scientists found astounding ways to detect and then extract oil from the most harsh environmental challenges. The oil drilling stocks are part and parcel of the oil industry.

Recently two of the biggest players in the drilling industry, Transocean Inc, (RIG) and Global Santa Fe Corp. (GSF) announced merger plans. Individually, RIG sells for around $70 per share and RIG in the neighborhood of $102. These companies are backed by billions of dollars and their institutional investors are stellar. Another drilling company of note is Diamond Drilling. This drilling stock is owned by Fidelity Funds, Vanguard Funds, Loews Corp. and Thornburg Investments to name just a few. The oil drilling stocks merit a good look and watch for buying opportunities if there are dips in the near future. In the alternative you can choose a mutual fund from one of the institutional investors mentioned in this piece that focuses on the oil sector.

This has been a brief overview of the oil sector. Review your investment objectives and seek the advice of licensed estate planner or stock broker. Company prospectives are available on-line and by mail.

As your knowledge about Stock Market continues to grow, you will begin to see how Stock Market fits into the overall scheme of things. Knowing how something relates to the rest of the world is important too.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

Knowing the Different Kind of Barbecue Grills

The more you understand about any subject, the more interesting it becomes. As you read this article you’ll find that the subject of Barbecues is certainly no exception.

There are literally hundreds of barbecue grills in the market. In fact, some manufacturers launch new models every month to provide the consumers better options. To remain competitive, they have to come up with new features and new technology.

Still, whatever new features barbecue grills have right now, everything still comes down to the basic features when buying one.

Materials used

A barbecue grill can be made of different kinds of materials. Some are made of stainless steel while others are just made from cast aluminum, cast iron or sheet metal. Of course, barbecue grills that are stainless steel are more expensive and vastly preferred not only at home but also in industrial settings.

You should however be careful in buying stainless steel barbecue grills as some brands have models that have painted steel frames that are prone to rusting. If you are going to buy a stainless steel barbecue grill, make sure that all of its parts are stainless. Otherwise, you will not get your money?s worth.

The more authentic information about Barbecues you know, the more likely people are to consider you a Barbecues expert. Read on for even more Barbecues facts that you can share.

Fuel used

Barbecue grills also differ on the ?fuel? that it uses. There are gas grills, electric grills and of course the most basic, the charcoal grills.

Gas grills is perhaps the most common one these days because of its competitive price range and of course convenience. It runs either in natural gas or in propane. If you decide on buying a barbecue gas grill, make sure that you have a big space waiting. Barbecue gas grills requires a lot of space. Another thing is that it cannot be placed so near other appliances and structures in the house for safety reasons. But what is great about gas grills is that you will cook your barbecue faster compared to other types.

Charcoal grills, on the other hand, are for the people who still want the feel of traditional barbecuing. Charcoal gives better flavor to the meat perhaps because there is less oil used but unlike gas grills, it will take you a really long time before you can set it up, get the fire going and cook the barbecue. In fact, it will tale about 20 to 30 minutes just to set the fire.

Another disadvantage is that charcoal grills can?t be turned off at your will. This is why, all the meat that will be barbecued should be cooked already as starting another fire for another round of cooking can take a long long time. Still, this is still quite ideal during parties and get together where people just want to relax while cooking barbecues.

Although charcoal grills are cheaper than gas grills, make sure that you include in your computation the fuels that you use. If you grill all the time, it is better if you get a gas grill instead as frequent charcoal grilling of one or two barbecue items can cost you a lot more.

Take time to consider the points presented above. What you learn may help you overcome your hesitation to take action.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

Techniques to Properly Finish Drywalls

If you have even a passing interest in the topic of Drywall, then you should take a look at the following information. This enlightening article presents some of the latest news on the subject of Drywall.

If you ask anyone who installs drywalls professionally, they will tell you that installing it is almost an art. You have to remember that installing drywalls is not as simple as hammering nails in it in order to install it. It?s much more complicated than that and it will take you years before you actually perfect the process of installing drywalls and really get a great and professionally looking finish.

As a do it yourselfer, you need to keep in mind that installing drywalls can be done even without extensive experience. It?s not that hard but there are some things that you have to know about the process in order for you to do it without making lots of costly mistakes.

The first thing that you have to keep in mind is to have everything that you need before you start. You have to have the tools and equipments that you need before you start installing the drywall. For this kind of project, you will need several things, such as joint compound, hand knife spreader, joint tape, application knife, and bread pan. You will also need a corner taping tool.

Once you have the tools that you need, you are now ready to start installing your drywall.

Another tip that you have to keep in mind is that the drywall demands precise measurement. You also need to make sure that every panel you install is tightly secured to the supports or the foundations that it is nailed to. Besides, there is nothing more embarrassing to have your newly installed drywalls fall down all of a sudden when you are entertaining visitors around your home.

It’s really a good idea to probe a little deeper into the subject of Drywall. What you learn may give you the confidence you need to venture into new areas.

You also have to remember that the nails you use should be long enough in order to keep the panels secured on their supports. You can also use screws if you want or you can use them in conjunction with the nails to provide more support.

When installing drywall, you have to remember that mixing the cement or mud to the right consistency is essential. The consistency of the mix should be like icing on a cake and it shouldn?t be too stiff or too loose. To check for its consistency, scoop up some drywall mud with a trowel and hold the trowel upside down. The mud should not fall down when you do this. And, when applying the cement or mud in to the drywall joints, it shouldn?t take too much effort or you should be able to do this easily.

You also have to remember that when you are on the process of mixing the mud, do not whip the cement. The whipping action will attract air in to the mud, which can form bubbles when you apply it in the drywall seams.

Another great tip that you may want to remember when it comes to finishing drywalls is to use mesh tape instead of paper tape. Because of the fact that mesh tape is porous, it will be able to provide you with a much smoother finish after applying the mud or cement.

Remember these tips and you can be sure that you will have a professional looking finish whenever you install drywalls in your home.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

Recycling: Are You Doing Everything You Can?

In today’s world, it seems that almost any topic is open for debate. While I was gathering facts for this article, I was quite surprised to find some of the issues I thought were settled are actually still being openly discussed.

It may come as a surprise to you, but there is a really good chance that the town or city you live in offer a service you may not have heard of; an energy audit. Cities and towns all over the country have started doing this, where an auditor comes to your home and goes through your living space and helps you to see where you could make changes that will not only help you conserve energy but will help you save money! What a bonus it is to save money by doing the right thing.

There are so many changes you can make in your home to impact the way we recycle and in the end, will help you keep some of the money in your pocket.

Having recycling bins set up so that you can properly sort the items that are recycled is a great first step. That activity alone can cut down greatly on the items that end up in the landfills rather than where they can be recycled.

Keeping your televisions, DVDs, stereos and computers plugged in to a power strip or surge protector rather than directly into the wall and then turning off the power strip will cut back greatly on power “leaks” that can cost you money on your utility bill. Being aware to turn these items off, is the first step, and then having them plugged into the power strip will just further the action for saving money and energy.

You may not consider everything you just read to be crucial information about Recycling. But don’t be surprised if you find yourself recalling and using this very information in the next few days.

Don’t leave a light on when you walk out of a room and no one else is in there. And have you changed your light bulbs from the traditional ones to the compact flourescent kind? Did you know that the newer lights use 75% less energy to run and they will out live a traditional light bulb by up to 10 years? Make the changes that need to be made in your home.

Don’t run the dishwasher or the washing machine unless they are full. It’s a waste of energy and water to run a cycle through the dishwasher when it’s only half full. Don’t turn it on until you have a full load to wash and then just wash them all at once.

Use microfiber cloths for cleaning all kinds of surfaces like furniture, counters and sinks. The bonus is that these items can be tossed into the washer and are perfectly able to be reused again and again. Think of the savings in paper towels alone! Talk about a win-win; if we use fewer paper towles, then that means fewer trees need to be cut to make them in the first place. How can we go wrong with thinking like that?

Take shorter showers and see if you can pick up a shower head that is a water-conserving item, already in place, that will save you money and you’ll never even notice the difference during your shower.

There is so much you can do in the efforts to recycle, just be sure you’re doing your part.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

Stock Market Trading Strategies

There are several trading strategies used by investors in buying and selling in the stock market. These strategies are used by investors to check out the stocks to buy and the time to sell them.

These strategies count up to more than a hundred ways, all tried and tested, all effective, and have been so for many years. Experts advise beginners to investigate some more of these basic trading strategies.

Hedging

Hedging is a way of protecting an investment through the reduction of the risks involved in holding a particular stock. One way is buying a put option.

This allows the selling of the stock at a particular price within a certain time period. In turn, this offsets the risk of a decrease in the stock prices. (There will be a value increase of the put option as soon as the stock price falls.)

Selling financial futures like the S&P 500 is another way of hedging against market declines. However, the most expensive hedging strategy is to buy put options against individual stocks.

Investors with big portfolios is better off if they buy a put option on the stock market itself for the reason that it protects them from general market declines.

Dogs of the Dow

This strategy (popular in the 90s) entail the buying of the best-value stocks in the Dow Industrial Average. These are the ten stocks with the lowest P/E ratios but with the highest dividend yields.

This tactic hinges on the idea that these ten lowest companies have the most potential for growth. The Dow Index have their listed companies as those which have a reliable investment performance.

Pigs of the Dow

If you base what you do on inaccurate information, you might be unpleasantly surprised by the consequences. Make sure you get the whole Stock Market story from informed sources.

This is a 180-degree variation of the Dogs of the Dow strategy. In Pigs of the Dow, five of the worst-performing stocks on the Dow are selected, based on their price decline percentage from previous years.

The twist lies in the assumption that these Pigs of the Dow, the worst-performing five stocks, are going to rebound more than the others will.

Buying on margin

Buying on margin is buying stocks using money from a broker. Because of more stocks received despite the low investment, the investor is given more by margin buying rather than by full payments.

In the event the stock loses value, the losses in margin buying is correspondingly bigger. In order to limit these, investors have stop-loss orders when buying on margin. This is usually about 10% of the total account value.

Dollar cost averaging

This is investing fixed dollar amounts on a regular basis. (Example: monthly buys of shares from a mutual fund.)

A price drop will cause the investors to receive more shares for their money. Conversely, a raise in the price will cause fewer shares bought.

Value averaging

Value averaging is the alternative to dollar cost averaging. This involves a decision to have investments set to a regular value.

If the price of the fund increases, the investors will put in higher dollar amounts to match the increase. If the fund price decreases, they will spend less money. Their investment will average out to the actual cost of the fund.

To date, value averaging performs better than dollar cost averaging strategy most of the time. When used in tandem with the other stock market strategies, value averaging can actually help in securing investment fund growth.

Is there really any information about Stock Market that is nonessential? We all see things from different angles, so something relatively insignificant to one may be crucial to another.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

Recycling To Keep Our Planet Healthy

We’ve all heard the warnings; acid rain, global warming, landfills without any room, and on and on. We don’t recycle because it’s the “in” thing to do; we recycle because we don’t have any other options if we plan to leave the planet for generations to come.

When you think of recycling you should really think about the whole idea; reduce, reuse and recycle. Think about it; if you don’t need it, don’t get it. If you have to get it, get something that can be used again and if you get something that needs to be recycled by the professionals, put it in the recycle bin.

These are easy concepts and yet there are still people out there who ignore the signs. The signs aren’t just the ones that bare the recycle logo, but the signs that the oceans are warming and the snow caps that were visible a few years ago are barely an outline as far up as you can see. If you’ve seen the Al Gore movie, An Inconvenient Truth, you’ll know that those of us a few miles inland from the coast will be looking at water front property one day, without having to move.

We’ve been careless up to this point with the way we’ve treated the Earth and it’s time to change; not just the way we do things but the way we think. The days of brushing your teeth with the water running the whole time are over and if we want to stay with this forward motion, we can’t go back. We can’t go back to the days when we believed we had all the room in the world for our trashed “stuff.” We’re getting full and we have to learn how to make less, use things more or find a way to reuse them again.

Most of this information comes straight from the Recycling pros. Careful reading to the end virtually guarantees that you’ll know what they know.

If you’re traveling, use airlines that work with paperless ticketing (if you have to fly that is) and be sure to scope out hotels that are inline with the recycling idea. Bring your own soaps and shampoos; leave the little bottles provided by the hotel for people who forget to bring their own. Reuse your towels more than once and don’t have the linens changed daily, let it go a day or two.

Before you leave for a trip remember to turn down your thermostadt and/or adjust the AC. Unplug your electronics from the wall to stop possible leaking wattage while it’s turned off. Utilize some of the power strips for pulling items in and turn off the whole strip when you’re leaving the house.

Use linen napkins that can be washed and reused instead of paper products, check your cleaning supplies for any that have the words dangerous, poisonous or hazardous and stop using them right now! The damage they are causing to the earth whether it’s through direct contact or drainage from a landfill, these chemicals are not healthy and have no business in our soil and our drinking water.

Be mindful of what you do, pay attention to the items you buy and always check yourself to see if you really need it or if it comes in a package with less waste. We can all do our part and we will make a huge difference.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

How to Grill Your Chicken Barbecue

The following article lists some simple, informative tips that will help you have a better experience with Barbecues.

Barbecuing is already a complicated task as it is but barbecuing chicken can be even more complicated especially to the novice. Unlike pork and beef, which you can slice in just the right thickness so that it will be cooked at a precise degree, chicken can be trickier to manage.

The greatest challenge in making chicken barbecue is the fact that you have to cook the inside without making the outside a charred mess! This can be really difficult if you cannot see the inside. This is why some people cut a small part in the piece to open the chicken up and let the heat inside.

Remember that eating half-cooked chicken can be really dangerous so make sure that you serve cooked chicken. You will know that a chicken is already cooked when the juices run clear. You can also use a meat thermometer to find out the temperature of the chicken dish. An internal temperature of at least 170 degrees Fahrenheit is already ok.

Here are some tips and warnings that will help you in coming up with a really great chicken barbecue meal.

The information about Barbecues presented here will do one of two things: either it will reinforce what you know about Barbecues or it will teach you something new. Both are good outcomes.

1. When preparing your barbecue chicken, leave the application of the barbecue sauce until the last 10 minutes of cooking until you are sure that the chicken is already cooked inside. Most barbecue sauces that are used as marinade have sugar as one of their ingredients. Sugar can burn the chicken of it is exposed to heat for a long time.

If you really want flavor for your chicken barbecue, what you can do is to marinate a day early and just put the chicken in the refrigerator. This way, the flavor of the marinade will have time to seep through the chicken.

2. Who says you cannot cheat a bit? If you feel that you cannot cook the chicken from the inside without first burning it up, you can always cook it partially in the microwave oven for about 8-10 minutes. This way, you are sure that the meat is already cooked and will only need some good-old fashion grilling and marinating. Besides, this will cut down the amount of time that you will spend turning the chicken over in the grill.

3. Fats from the chicken can drip and cause the fire from the grill to flare-up. This will unknowingly increase the temperature that you are using. To avoid this, you may want to use a foil over the grill to prevent the fat oil from dripping down.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

The “Green” Benefits of Computer Recycling

Have you ever wondered if what you know about Recycling is accurate? Consider the following paragraphs and compare what you know to the latest info on Recycling.

Computers are an important part of our daily lives these days. We use them for sending e-mails and other office correspondence, and we also use them for surfing the Internet, or for watching our favorite movies and TV shows. We also use the PC for networking with friends or family.

However, what happens when the PC you have at home becomes obsolete? Will you be simply throwing these down the landfill? Let’s have a closer look at the benefits of recycling computers.

Obsolete Computers Are a Good Source of Raw Materials

Even if you’re home computer is already one useless piece of equipment after a few years, it won’t mean that it’s totally useless. An obsolete computer actually serves as a wonderful source of useful raw materials. However, if the old computer is not properly disposed or handled, it can be a source of harmful toxins and carcinogens, which pollute the environment and can cause death and injury to both man and animals.

Rapid advances in technology, coupled with low initial costs has resulted in an ever-increasing surplus of computers and computer parts worldwide. The Environmental Protection Agency of the US estimates that there are 30 to 40 million surplus PC’s in the US alone, and that 63 million PC’s were either traded for replacements, or simply throw away last year.

If you base what you do on inaccurate information, you might be unpleasantly surprised by the consequences. Make sure you get the whole Recycling story from informed sources.

The Rise in The Numbers Of Surplus PC’s Is Posing A Serious Environment Threat

The EPA further adds that most of today’s electronic waste often ends up in landfills, or gets incinerated. The dumping of these waste in landfills, or their burning in incinerators, is already having a very negative impact on the environment. Because a computer has different components that are made from a wide array of raw materials, these release toxic ingredients like mercury, lead, cadmium, and other radioactive material into the groundwater, soil or air.

Many Computer Parts Can Be Recovered Through Recycling

Because of the toxic nature of most of the computer’s parts, the storage, handling,disposal and recycling of computers is a sensitive task. The good thing is that most of the materials used in making computers can actually be recycled. Materials such as aluminum, tin, silicone, iron, copper, gold and a wide array of plastics, can be reused or re-processed, which help in reducing the cost of manufacturing new computer units.

The Resource Conservation and Recovery Act of 1976 used to be the main federal law governing the recycling of computers. However, new federal bills, such as the National Computer Recycling Act, have been introduced to reduce electronic waste, and mitigate their environmental impact. Many computer manufacturers are now also offering some form of recycling to their clients. The user can request that his old computer be picked-up by the manufacturer, or the company can get them for recycling at specified drop-off points, where they also coupons to customers for use in purchasing future computers or parts.

You can’t predict when knowing something extra about Recycling will come in handy. If you learned anything new about Recycling in this article, you should file the article where you can find it again.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting




Search
Categories